1600 & 1700
ENCLOSED LOW PRESSURE
Air and Water
GENERAL APPLICATION
Totally enclosed reels for service station lube rooms, service yard or pump islands, garage centers, commercial kitchens or dairies. Used indoors or outdoors where appearance and hose protection is required. Mounts to ceiling, wall or floor.
 |
 |
|
All brass swivel joint with double O-ring seals. Secured independently from other moving parts.
Heavy fabricated steel base with slotted mounting holes for easy installation.
Multi-position ratchet pawl made of non-sparking material.
Parts are painted or treated before assembly.
High grade blue steel motor spring matched and balanced to fit the job.
Reel turns on bronze self-lubricating bearing.
Plastic hose protector on working end of hose.
|
ENCLOSURE
Attractive, beautifully finished enclosures may be had in any color, white is standard. Roller outlets are easily adjusted for ceiling, wall or floor. Two screws give accessibility to reels.
HOSE AND INLET SOURCE LINES
Hose supplied with standard female swivel pipe fittings for easy installation. One piece adjustable hose stop can be installed any place along the hose length. Independent flexible inlet lines with female fittings for easy hook up.
ENCLOSED HOSE REELS
Single & Double Enclosed
 |
 |
| SINGLE ENCLOSED |
| Model Number |
Hose Length |
Hose I.D. |
Shipping Weight |
| 1601 |
20 feet |
1/4" |
31 |
| 1602 |
25 feet |
1/4" |
32 |
| 1603 |
30 feet |
1/4" |
34 |
| 1604 |
35 feet |
1/4" |
35 |
| 1608 |
20 feet |
3/8" |
32 |
| 1609 |
25 feet |
3/8" |
33 |
| 1610 |
35 feet |
3/8" |
35 |
| 1611-L |
50 feet |
1/4" |
45 |
| 1613-L |
50 feet |
3/8" |
48 |
| 1614-L |
25 feet |
1/2" |
46 |
|
| DIMENSION CHART |
|
A |
B |
C |
D |
E |
| 1600 |
15 1/2" |
17" |
8" |
6" |
8" |
| 1700 |
15 1/2" |
17" |
13" |
11 1/2" |
8" |
| 1600-L |
18" |
20" |
8" |
6" |
8" |
| 1700-L |
18" |
20" |
13" |
11 1/2" |
8" |
Mounting Holes: 1600 - 4 1/2 " x 7" centers
1700 - 7" x 10" centers |
 |
 |
| DOUBLE ENCLOSED |
| Model Number |
Hose Length |
Hose I.D. |
Shipping Weight |
| 1701 |
20 and 20 feet |
1/4" |
53 |
| 1702 |
25 and 25 feet |
1/4" |
58 |
| 1703 |
30 and 30 feet |
1/4" |
60 |
| 1704 |
35 and 35 feet |
1/4" |
64 |
| 1708 |
20 and 20 feet |
3/8" |
58 |
| 1709 |
25 and 25 feet |
3/8" |
64 |
| 1710 |
35 and 35 feet |
3/8" |
68 |
| 1711-L |
50 and 50 feet |
1/4" |
74 |
| 1713-L |
50 and 50 feet |
3/8" |
80 |
| 1714-L |
25 and 25 feet |
1/2" |
70 |
|
 |
MATERIALS
All materials other than bronze or brass are protected against rust by a heavy powder coat, cadmium plating or other conversion materials.
Hose roller outlet positioned for ceiling mount unless otherwise specified on order.
Standard finish is white powder coat. Enclosures can be furnished in chrome, bright plate or stainless steel at extra cost.
1700 series available with other combinations of hose lengths and sizes, please specify.
Ceiling Mount Enclusures
For Individual or Mutiple Bank Enclosures
ENCLOSURES
Fiberglass
ONE PIECE DURABLE FIBERGLASS CONSTRUCTION
Enhances appearance while giving protection of hose reel. One piece construction for rigidity. Finished in permanent smooth white. Entire cover is easily removed by means of accessible fasteners. Aluminum and nylon roller hose outlet for best hose wear. Enclosures may be purchased separately for use with previously installed hose reels or competitive models.
When ordered with hose reels the unit is shipped completely assembled.
|
Overhead installations are made easy by means of a slide plate. Plate is secured first then complete unit is slid into place. After connecting the inlet source line the unit is ready to use.
No pre-assembly of enclosure or mounting of hose reels is required.

|
HOW TO ORDER
First pick out desired hose reel, then order corresponding enclosure from chart below. State mounting position, ceiling, floor or wall. Consult factory for other available colors.
|
|
ENCLOSURE DIMENSIONS |
| Enclosure Type |
Reel Type |
Width |
Length |
Height |
Shipping
Weight |
| 1 |
1400 all models |
11" |
21 1/2" |
19 1/2" |
30 lbs |
| 2 |
1200, 1300 all models |
11" |
24 1/2" |
24" |
40 lbs |
| 3 |
Combination of two 1200, 1300 or 1400 and 3001 through 3011 |
22" |
28" |
30" |
55 lbs |
| 4 |
Custom Painted Steel |
-- Specify Reel -- |
N/A |
| 5 |
Custom Stainless Steel |
-- Specify Reel -- |
N/A |
|
F.O.B. Factory
|