Sidebar Menu
Made in the USA
Duro Manufacturing warehouse

Ceiling Mount Enclosures

For Individual or Mutiple Bank Enclosures

checkbox list Easily bolted together for a smooth clean look.
checkbox list Nylon rollers in aluminum frame guides hose freely.
checkbox list Hose reels slide into place and secures with one bolt.
checkbox list No assembly of reel enclosures.
checkbox list Hook up lines furnished with each reel.
checkbox list Metal enclusures finished in a white powder coat finish with white or black end panels.

For use with standard 1400, heavy duty 1200, 1300 or 2500 series reels.
Model Description Shipping Weight
19-1 REEL HOUSING (Cabinet)
One for each hose reel.
19-2 END PANELS (Set)
One set for single or multiple banks.
Two for mounting single. One for every cabinet in reel bank.

Reel House Chart

Fiberglass Enclosures

Enhances appearance while giving protection of hose reel. One piece construction for rigidity. Finished in permanent smooth white. Entire cover is easily removed by means of accessible fasteners. Aluminum and nylon roller hose outlet for best hose wear. Enclosures may be purchased separately for use with previously installed hose reels or competitive models.

When ordered with hose reels the unit is shipped completely assembled.

Overhead installations are made easy by means of a slide plate. Plate is secured first then complete unit is slid into place. After connecting the inlet source line the unit is ready to use.

No pre-assembly of enclosure or mounting of hose reels is required.



First pick out desired hose reel, then order corresponding enclosure from chart below. State mounting position, ceiling, floor or wall. Consult factory for other available colors.

Enclosure Type Reel Type Width Length Height Shipping
1 1400 all models 11" 21 1/2" 19 1/2" 30 lbs
2 1200, 1300 all models 11" 24 1/2" 24" 40 lbs
3 Combination of two 1200, 1300 or 1400 and 3001 through 3011 22" 28" 30" 55 lbs
4 Custom Painted Steel -- Specify Reel -- N/A
5 Custom Stainless Steel -- Specify Reel -- N/A
Multiple Mounting Plates

For Duro Reels

MC-1 Beam Mounting Channel
Fits all I beams to 8". Installs directly on all mounting plates listed below. Installs directly to the base of 1200, 1300, 2100, 1800 H.D. and all 1900 enclosures. Two required for a single open reel.

19-1 Bank Enclosures

Special I Beam Enclosure Plates
Model Number Description
EP-1 One Enclosure
EP-2 Two Enclosures
EP-3 Three Enclosures
EP-4 Four Enclosures
EP-5 Five Enclosures
EP-6 Six Enclosures
For more than six enclosures, use combination of plates.
Note: The (EP) plates listed above come with the (MC) I beam channel welded to them.


The listed mounting plates are for installing Duro Reels to wall or ceiling (steel) with bolts, weld or I beam channels.
1400, 1600, 1800 Series
Model Number Description
MP-1 ONE REEL (1400, 1600, 1800 REG.)
(Two I beam channels must be used)
MP-2 TWO REELS (1400, 1600, 1800 REG.)
(Two I beam channels must be used)
MP-3 THREE REELS (1400, 1600, 1800 REG.)
(Three I Beam channels should be used)
MP-4 FOUR REELS (1400, 1600, 1800 REG.)
(Three I beam channels should be used)
For more than four reels use combinations such as MP-2 and MP-4 for six reels or two MP-3.


1500, 1700 Series
Model Number Description
MP-5 ONE DOUBLE REEL (1500, 1700)
(Two I beam channels must be used)
MP-6 TWO DOUBLE REELS (1500, 1700)
(Three I beam channels should be used)
MP-7 THREE REELS (1500, 1700)
(Four I beam channels should be used)
For more than three double reels (6 reels) use combinations.


1200, 1300, 2100, 1800 HD Series
Model Number Description
MP-8 ONE REEL (1200, 1300, 2100, 1800HD)
(Two I beam channels must be used)
MP-9 TWO REELS (1200, 1300, 2100, 1800HD)
(Three I beam channels must be used)
MP-10 THREE REELS (1200, 1300, 2100, 1800HD)
(Four I beam channels must be used)
MP-11 THREE REELS (1400 or 2500 COMBINED)
(Four I beam channels must be used)
MP-12 THREE REELS (1200, 1300, 2100, 1800HD, 2500)
(Four I beam channels must be used)
For more than three reels use combinations.