Duro Reels - Duro Manufacturing Inc

1800 RETRACTABLE WELDING REEL
Single & Double Reels for Bi-Line Hose
Combination Welding, Air or Water

For more efficiency in high production shops - Keeps a clean, uncluttered shop and eliminates unneeded cleanup time - Replacement hoses greatly reduced - Saves pick up time on portable equipment - A variety of combinations are offered.

Features


Sealed motor spring with built in de-clutching arbor. Balanced to give a nearly constant load when extending hose.

Hose is held out at any working length tension free, by non-gravity and non-sparking type locking pawl. A slight tug of the hose releases for automatic rewind.

Cast aluminum hose arm guides are adjustable to all working positions. Ceiling, wall or floor. Quiet, safe, friction free nylon rollers mean less wear to hose lengths.

Swivel joints have dual housings on single shaft. Independent housings prevent possible mixture of gases. Swivel is easily removed as one part.

Reel spools are heavy smooth beaded steel to provide maximum protection for hose chafing. Heavy self-lubricating main bearing pressed into cast aluminum axle hub. All materials are protected against rust by heavy powder coating, cadmium plate or other conversion coatings.

 

SERIES 1800 SINGLE & DOUBLE
WELDING REELS

                                                                                                         
Order by this number 
When ordering specify hose I.D.
SINGLE REELS FOR TWIN WELDING HOSE (3/16 I.D. AND 1/4 I.D.)
Model Number Hose Capacity Hose I.D. Approx. Weight Dimension Number
1804 25 feet 3/16" or 1/4" 31 1
1805 30 feet 3/16" or 1/4" 37 2
1806 35 feet 3/16" or 1/4" 38 2
1807 40 feet 3/16" or 1/4" 40 2
1808 50 feet 3/16" 43 2
HEAVY DUTY SINGLE REELS FOR TWIN WELDING HOSE
1809 50 feet 3/16" or 1/4" 67 5
1810 65 feet 1/4" 72 5
1811 75 feet 3/16" 70 5
DOUBLE REELS FOR TWIN WELDING HOSE (3/16 I.D. AND 1/4 I.D.)
(Two twin hose reels on one mounting base)
1813 25 and 25 feet 3/16" or 1/4" 62 3
1814 35 and 35 feet 3/16" or 1/4" 66 4
1815 40 and 40 feet 3/16" or 1/4" 72 4
1816 50 and 50 feet 3/16" 78 4

DOUBLE REELS FOR TWIN WELDING AND WATER HOSE
(One welding hose reel and one water hose reel on one mounting base.)
Model Number Welding Hose Size Water or Air Hose Size Shipping Weight Dimension Number
1820 25 feet 3/16" 25 feet 3/8" 60 3
1821 35 feet 3/16" 35 feet 3/8" 65 4
1822 50 feet 3/16" 50 feet 3/8" 70 4
Other combinations of hose lengths and sizes available upon request
SERVICE TRUCK WELDING REEL
Heavy Duty with extra long hose lengths
1830 100 feet 3/16" 96 6
1831 100 feet 1/4" 95 6
NOTE: Grade 'T' hose available upon request
Overall Dimensions
Dimension Number Diameter Height Width Center Lines of Mounting Holes
1 16" 17 1/2" 7 3/4" 4 1/2" x 7"
2 18" 21" 7 3/4" 4 1/2" x 7"
3 16" 19" 14" 7" x 10"
4 18" 22 1/2" 14" 7" x 10"
5 22" 23" 9" 6" x 10"
6 22" 24 1/2" 16" 6" x 10 1/2"

NOTE: Grade 'T' hose available upon request. For hand crank reels consult factory.


Duro Manufacturing, Inc.
3505 Arrowhead Drive, Carson City, Nevada 89706
For Order Inquires please call our Toll Free number or send us an E-Mail
E-Mail: sales@durohosereels.com

Toll Free: 800-866-3876 Local: 775-687-8866 Fax:775-687-8877

Reel Technology | Hose, Electrical & Cable Reel Parts Catalog
Self-Service Air Water Equipment | Self Serve Air & Water Parts Catalog
Retractable Electric Cords | About duro Reels
Product Design | Contact Info | Home Page